Routino : Output ================ There are three different formats of output from the router, HTML, GPX (GPS eXchange) XML format and plain text with a total of five possible output files: * HTML route instructions for each interesting junction. * GPX track file containing every node. * GPX route file with waypoints at interesting junctions. * Plain text description with the interesting junctions. * Plain text file with every node. The "interesting junctions" referred to above are junctions where the route changes to a different type of highway, more than two highways of the same type meet, or where the route meets but does not take a more major highway. When the route follows a major road this definition eliminates all junctions with minor roads. The output files are written to the current directory and are named depending on the selection of shortest or quickest route. For the shortest route the file names are "shortest.html", "shortest-track.gpx", "shortest-route.gpx", "shortest.txt" and "shortest-all.txt", for the quickest route the names are "quickest.html", "quickest-track.gpx", "quickest-route.gpx", "quickest.txt" and "quickest-all.txt". The HTML file and GPX files are written out according to the selected language using the translations contained in the translations.xml configuration file. The text files contains untranslated header lines (in English) but the data is translated. HTML Route Instructions ----------------------- The HTML route instructions file contains one line for the description of each of the interesting junctions in the route and one line for each of the highways that connect them. The coordinates are also included in the file but are not visible because of the style definitions. An example HTML file output is below (some parts are missing, for example the style definitions): Shortest Route ...

Shortest Route

1:51.524658 -0.127877
Start:At Waypoint, head South-East
Follow:Woburn Place (A4200) for 0.440 km, 0.5 min [0.4 km, 1 minutes]
2:51.521460 -0.124099
At:Junction, go Straight on heading South-East
Follow:Southampton Row (A4200) for 0.34 ...
21:51.478354 -0.103560
At:Junction, go Right heading South-West
Follow:Vassall Road for 0.013 km, 0.0 min [6.4 km, 6 minutes]
22:51.478244 -0.103651
Stop:At Waypoint
Total:6.4 km, 6 minutes
GPX Track File -------------- The GPX track file contains a track with all of the individual nodes that the route passes through. An example GPX track file output is below: Creator : Routino - http://www.routino.org/ http://creativecommons.org/licenses/by-sa/2.0/ Shortest route Shortest route between 'start' and 'finish' waypoints ... GPX Route File -------------- The GPX route file contains a route (ordered set of waypoints) with all of the interesting junctions that the route passes through and a description of the route to take from that point. An example GPX route file output is below: Creator : Routino - http://www.routino.org/ http://creativecommons.org/licenses/by-sa/2.0/ Shortest route Shortest route between 'start' and 'finish' waypoints START South-East on `Woburn Place (A4200)` for 0.440 km, 0.5 min TRIP001 South-East on `Southampton Row (A4200)` for 0.348 km, 0.4 min ... South-East on `Camberwell New Road (A202)` for 0.597 km, 0.4 min TRIP020 South-West on `Vassall Road` for 0.013 km, 0.0 min FINISH Total Journey 6.4 km, 6 minutes Text File --------- The text file format contains one entry for all of the interesting junctions in the route and is intended to be easy to interpret, for example for creating other output formats. An example text file output is below: # Creator : Routino - http://www.routino.org/ # Source : Based on OpenStreetMap data from http://www.openstreetmap.org/ # License : http://creativecommons.org/licenses/by-sa/2.0/ # #Latitude Longitude Section Section Total Total Point Turn Bearing Highway # Distance Duration Distance Duration Type 51.524658 -0.127877 0.000 km 0.0 min 0.0 km 0 min Waypt +3 Woburn Place (A4200) 51.521460 -0.124099 0.440 km 0.5 min 0.4 km 1 min Junct +0 +3 Southampton Row (A4200) ... 51.478354 -0.103560 0.597 km 0.4 min 6.4 km 6 min Junct +2 -3 Vassall Road 51.478244 -0.103651 0.013 km 0.0 min 6.4 km 6 min Waypt The text file output contains a header (indicated by the lines starting with '#') and then one line for each waypoint or junction. Each line contains the information for the current node and the next segment to be followed. For each of the lines the individual fields contain the following: Latitude - Location of the node (degrees) Longitude - Location of the node (degrees) Section Distance - The distance travelled on the section of the journey that ends at this node. Section Duration - The duration of travel on the section of the journey that ends at this node. Total Distance - The total distance travelled up to this point. Total Duration - The total duration of travel up to this point. Point Type - The type of point; either a waypoint Waypt or junction Junct. Turn - The direction to turn at this point (missing for the first line since the journey has not started yet and for the last line because it has finished). This can take one of nine values between -4 and +4 defined by: 0 = Straight, +2 = Right, -2 = Left and +/-4 = Reverse. Bearing - The direction to head from this point (missing for the last line since the journey has finished). This can take one of nine values between -4 and +4 defined by: 0 = North, +2 = East, -2 = West and +/-4 = South. Highway - The name (or description) of the highway to follow from this point (missing on the last line since the journey has finished). The individual items are separated by tabs but some of the items contain spaces as well. All Nodes Text File ------------------- The all nodes text file format contains one entry for each of the nodes on the route. An example all nodes text file output is below: # Creator : Routino - http://www.routino.org/ # Source : Based on OpenStreetMap data from http://www.openstreetmap.org/ # License : http://creativecommons.org/licenses/by-sa/2.0/ # #Latitude Longitude Node Type Segment Segment Total Total Speed Bearing Highway # Dist Durat'n Dist Durat'n 51.524658 -0.127877 12466852* Waypt 0.000 0.00 0.00 0.0 51.523768 -0.126918 12467208* Junct 0.119 0.15 0.12 0.1 96 146 Woburn Place (A4200) ... 51.478354 -0.103560 12604345* Junct 0.104 0.07 6.36 5.6 96 125 Camberwell New Road (A202) 51.478244 -0.103651 12604304 Waypt 0.013 0.01 6.37 5.6 64 207 Vassall Road The all nodes text file output contains a header (indicated by the lines starting with '#') and then one line for each node and the segment that was used to reach it. This file therefore contains exactly the same model as is used internally to define a route (a series of results each of which is a node and the segment leading to it). For each of the lines the individual fields contain the following: Latitude - Location of the node in degrees. Longitude - Location of the node in degrees. Node - The internal node number and an indicator "*" if the node is a super-node. Type - The type of point; a waypoint Waypt, junction Junct, change of highway Change or intermediate node Inter. Segment Distance - The distance travelled on the segment defined on this line. Segment Duration - The duration of travel on the segment defined on this line. Total Distance - The total distance travelled up to this point. Total Duration - The total duration of travel up to this point. Speed - The speed of travel on the segment defined on this line (missing on the first line). Bearing - The direction that the segment defined on this line travels in degrees (missing on the first line). Highway - The name (or description) of the highway segment (missing on the first line). -------- Copyright 2008-2011 Andrew M. Bishop.